Hi all. Looking for an air line holder that will hang on the aquarium and allow a 180 degree bend of the air line. Similar to a 4 way gang valve but it needs to be water tight and have 4 inputs and 4 outputs.
The closest thing I could find was something like this:
https://www.ebay.com/itm/Aquarium-Wa...4AAOSwACRavdUy
Does anyone know if such a thing exists? Perhaps in the hydroponics industry?
Edit: Imagine these but 4 way all connected and hanging over the aquarium:
https://www.amazon.com/dp/B07GMMG9R3...9-33eb8bfc8d81
Last edited by Spidy; 11-10-18 at 10:05 AM.
Thanks Vlad. I've seen all of those but they are single pieces. I'm looking for a hang on back style plastic holder that can accommodate 4 air lines and will allow a 180 degree bend.
If all else fails I'll just buy these:
https://www.ebay.com.au/itm/6pcs-Acr...3/122289889374
Get 4 of the stainless steel ones and get someone to weld them together. Or even fashion a bracket to hold all four.
Don't get acrylic ones as they will discolor over time.
Could probably get you something 3D printed to do what you need (but you'd have to incorporate the U style ones if you need them to be 100% water tight). Could make a bracket for 4 of them otherwise as vlad suggested?
"The stuff I buy is a bit pricey however it is as dry as a nuns nasty" - BigDaddyAdo
Thanks @vladguan for the links. I ordered a SS one for my dosing pump.
For the OP, how about these?
https://www.ebay.com.au/sch/i.html?_...older&_sacat=0